25
User's Manual |
CS332
Chapter 2
HARDWARE INSTALLATION
LAN LED
X
Internal I/O Connectors
The LAN LED connectors are used to indicate the connection state of RJ45 LAN ports when
the connection is made to an active network via a cable. The pin functions of the LAN LED con-
nector are listed below.
LAN LED Pin Assignment
Pin Assignment
Pin Assignment
1
GBE(LAN1/3)_1000
2
GBE(LAN1/3)_100
3
GBE(LAN1/3)_LED_LINK_ACT
4
3V3DU
5
LINK(LAN2/4)_1000
6
LINK(LAN2/4)_100
7
LINK(LAN2/4)_ACTIVITY
8
3V3DU
LAN LED Connector
1
1
2
2
8
8
7
7
LAN 1/2
LAN 3/4
The lithium ion battery addendum supplies power to the real-time clock and CMOS memory
as an auxiliary source of power when the main power is shut off. Insert a coin cell battery into
the holder and make sure the polarities are correctly oriented — the cap side (rimmed rounded
edge) is negative and sould be facing the holder; the flat side with a + mark is positive and
should be facing away from the holder.
Safety Measures
• There exists explosion hazard if the battery is incorrectly installed.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to local ordinances.
Battery Holder
Battery
X
Internal I/O Connectors
