DFI CR901-B Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 69

DFI CR901-B Скачать руководство пользователя страница 47

www.dfi .com

Chapter 5 Supported Software

47

Chapter 5

Chapter 5 - Supported Software

The CD that came with the system board contains drivers, utilities and software applications

required to enhance the performance of the system board.

Insert the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear. If

after inserting the CD, “Autorun” did not automatically start (which is, the Mainboard Utility

CD screen did not appear), please go directly to the root directory of the CD and double-click

“Setup”.

Intel Chipset Device Software

The Intel Chipset Device Software is used for updating Windows

®

INF files so that the Intel

chipset can be recognized and configured properly in the system.

To install the utility, click “Intel Chipset Device Software” on the main menu.

1. Setup is ready to install the

utility. Click Next.

2. Read the license agreement

then click Yes.

«
...
45
46
47
48
49
...
»

Содержание CR901-B






































































Отзывы:

Нет отзывов