2
Hardware Installation
11
2.4 Jumper Settings for Wake-On-Keyboard/Mouse
Positionnement des Cavaliers pour Réveil-Sur-Clavier/
Souris
Jumpereinstellungen für die Wake-On Tastatur/Maus
Jumper JP1 - Wake-on-Keyboard/Wake-On-Mouse
To use the keyboard or mouse to power-on the system, please
follow the steps below.
1. Set JP1 to 2-3 On - enable.
2 Keyboard/Mouse Power On in the
Integrated Peripherals setup of the
Award BIOS must be set
accordingly. Refer to section 3.11
(chapter 3) for more information.
Warning:
1. If JP1 was previously enabled
with a password set in the KB
Power On Password field, and
now you wish to disable the
W a k e - O n - K e y b o a r d
(password) function, make sure
to set the Keyboard/Mouse
Power On field to Disabled
prior to setting JP1 to disabled.
You will not be able to boot up the system if you fail to do so.
2. The power button will not function once a keyboard
password has been set in the KB Power On Password
field of the Integrated Peripherals setup. You must type the
correct password to power-on the system.
3. The 5VSB power source of your power supply must
support
≥
720mA (minimum).
2-3 On: Enable
1-2 On: Disable
(default)
1
2
3
1
2
3
All manuals and user guides at all-guides.com
all-guides.com