2
Hardware Installation
23
2.7 Jumper Settings for the Onboard Audio Codec
Onboard Audio Codec Settings - Jumper J6
AMR may come as primary
or secondary. The audio codec
on the system board is
primary.
If you are using a primary
AMR on the AMR slot, please
set J6 to Off. If you are using
a secondary AMR on the
AMR slot or no AMR card is
installed on the AMR slot, you
must set J6 to On.
Off: Onboard
Audio Codec Secondary
On: Onboard
Audio Codec Primary
(default)
1
2
1
2
1
2
3
1
2
3
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select Save & Exit Setup and press <Enter>.
8. Type <Y> and press <Enter>.
