DFI BW171, Руководство пользователя

Страница: 36 / 55

www.dfi.com
36
Chapter 3 BIOS Setup
Chapter 3
PCI Express Configuration
This section configures settings relevant to PCI Express root ports.
Control the PCI Express
Root Port
PCI Express Configuration

PCI Express Root Port 1

PCI Express Root Port 2

PCI Express Root Port 3

PCI Express Root Port 4
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
Control the PCI Express
Root Port.
PCI Express Root Port 1
PCIe Speed
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enabled>
<Gen2>
PCI Express Root Port
This field is used to enable or disable the PCI Express Root Port.
PCIe Speed
Select the speed of the PCI Express Root Port: Gen1 or Gen2.
SIO NUVOTON6106D
This section configures the system super I/O chip parameters.
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss

PC Health Status

Smart Fan Function
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
COM Port 1 to Serial Port 4
Configure the settings to use the serial port.
Disable No configuration
Enable User configuration
Type
Choose RS232/RS422/RS485 (Peer-to-Peer) for the serial port type.
WDT
Enable or disable the watchdog function.
Case Open
Enable or disable the case open.
AC Power Loss
Set the AC power loss always off/on.
Configure Serial port using
options: [Disable] No Con -
figuration [Enable] User
Configuration