background image

6

Chapter 1 - Introduction

Specifications

Chapter 1

Chapter 1 Introduction

www.d

fi

 .com

Note:

*Optional and is not supported in standard model. Please contact your sales represen-

tative for more information.

I/O Connectors

• 2 connectors for 4 external USB 2.0 ports

• 3 connectors for 3 external serial ports (2.0mm pitch)

- 1 RS485

- 2 RS232

• 1 LVDS LCD panel connector

• 1 LCD/inverter power connector

• 1 8-bit DIO connector

• 1 DIO power connector

• 1 front audio connector for line-out and mic-in jacks

• 1 LPC connector

• 1 SMBus connector

• 1 Serial ATA connector

• 1 Serial ATA power connector

• 1 front panel connector

• 1 chassis intrusion connector

• 1 fan connector

Energy Effi cient 
Design

• Supports ACPI

• System Power Management

• Wake-On-Events include:

   - Wake-On-USB KB/Mouse* (optional)

   - Wake-On-LAN

   - RTC timer to power-on the system

• AC power failure recovery

Damage Free 
Intelligence

• Monitors CPU/system temperature and overheat alarm

• Monitors VCORE/12V/5V/DDR voltages and failure alarm

• Monitors system fan speed and failure alarm

• Read back capability that displays temperature, voltage and fan speed

Power 
Consumption

• TBD

OS Support

• Windows 7 Ultimate x86 & SP1 (32-bit)

• Windows 7 Ultimate x64 & SP1 (64-bit)

• Windows 8.1 Embedded Pro x86 (32-bit) 

• Windows 8.1 Embedded Pro x64 (64-bit)

Temperature

• Operating (TBD)

: 0

o

C to 60

o

C    - Atom, Celeron (Fanless)

: -20

o

C to 70

o

C - Celeron (Fanless)

: -40

o

C to 85

o

C - Atom (Fanless)

• Storage: -40

o

C to 85

o

C

Humidity

• 5

o

C to 90

o

Dimensions

• 3.5" board

• 146mm (5.75") x 102mm (4.02") 

Certifi cation

CE, FCC Class B, RoHS

Processor

• Intel

®

 Atom

TM

/Intel

®

 Celeron

®

 processors

E45: 

 

Intel

®

 Atom

TM

 E3845, Quad Core, 2M Cache, 1.91GHz, 10W

E26: Intel

®

 Atom

TM

 E3826, Dual Core, 1M Cache, 1.46GHz, 7W

J00: Intel

®

 Celeron

®

 J1900, Quad Core, 2M Cache, 2GHz (2.41GHz), 10W

• BGA 1170 packaging technology

• 22nm process technology

Super I/O 
Address

• NCT6106/4Eh

System Memory

• 2GB/4GB DDR3L memory down

• Supports DDR3L 1066/1333MHz

• Supports dual channel memory interface

Expansion 
Interface

• 1 Mini PCIe slot

  - Supports USB and PCIe signals

  - Supports full size Mini PCIe card

Graphics

• Intel

®

 HD Graphics

• Display ports: 1 VGA, 1 LVDS, 1 DP

• VGA: 24-bit, resolution up to 2560x1600 @ 60Hz

• LVDS: NXP PTN3460, 24-bit, dual channel, resolution up to 1920x1200 @ 60Hz

• DP: supports DP++, resolution up to 2560x1600 @ 60Hz

• Supports hardware acceleration for DirectX 11, OCL 1.2, OGL 4.0, H.264,

MPEG2, MVC, VC-1, WMV9 and VP8 (supported version dependent on OS)

Audio

• Realtek ALC888 2.1-channel High De

fi

 nition Audio

LAN

• 2 Intel

®

 I210 PCI Express Gigabit Ethernet controllers

• Integrated 10/100/1000 transceiver

• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Serial ATA

• 1 SATA 2.0 port with data transfer rate up to 3Gb/s

• Integrated Advanced Host Controller Interface (AHCI) controller

eMMC*
(optional)

• Supports 8GB, 16GB and 32GB eMMC onboard

• Supports Windows 8.1 only

Trusted
Platform
Module - TPM*
(optional)

• Provides a Trusted PC for secure transactions

• Provides software license protection, enforcement and password protection

WatchDog Timer

• Watchdog timeout programmable via software from 1 to 255 seconds

Rear Panel I/O 
Ports

• 1 12V (BT551) or 15~36V (BT553) DC-in jack 

or 4-pin power connector* (optional)

• 1 DP port

• 1 VGA port

• 2 RJ45 LAN ports

• 1 USB 3.0 port

• 1 USB 2.0 port

BIOS

• Insyde BIOS

   - 64Mbit SPI BIOS

Содержание BT551

































































Отзывы: