www.dfi.com
25
Chapter 5
Chapter 5 Ports and Connectors
Chapter 5
The SMBus (System Management Bus) connector is used to connect SMBus devices. It is a
multiple device bus that allows multiple chips to connect to the same bus and enable each one
to act as a master by initiating data transfer.
SMBus Connector
SMBus
Chassis Intrusion Connector
The board supports the chassis intrusion detection function. Connect the chassis intrusion
sensor cable from the chassis to this connector. When the system’s power is on and a chassis
intrusion occurred, an alarm will sound. When the system’s power is off and a chassis intrusion
occurred, the alarm will sound only when the system restarts.
1
1
ON
2
Chassis
Intrusion
1
1
ON
2
1
5
6
2
1 2
Ground
Signal
SMB_ALERT
SMB_CLK
3V3SB
GND
SMB_DATA
