26
2
Hardware Installation
JP2 and JP3 are used to select the power of the USB ports. Select-
ing 5V_standby will allow you to use the USB keyboard or USB
mouse to wake up the system.
BIOS Setting
“USB KB Wake-Up From S3” in the Power Management Setup
submenu of the BIOS must be set to Enabled. Refer to chapter 3
for more information.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for
2 USB ports, the 5V_standby power source of your power sup-
ply must support
≥
1.5A. For 3 or more USB ports, the
5V_standby power source of your power supply must support
≥
2A.
USB Power Select
X
USB 6/7/8/9/10/11
(JP3)
X
1-2 On: 5V
(default)
2-3 On:
5V_standby
3
1
2
3
1
2
1-2 On: 5V
(default)
2-3 On:
5V_standby
3
1
2
3
1
2
USB 0/1/2/3/4/5
(JP2)
