71
3
BIOS Setup
IDE HDD Block Mode
Enabled
The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled
The IDE HDD uses the standard mode.
IDE DMA Transfer Access
This field is used to enable or disable the DMA transfer function of
an IDE hard drive.
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is
selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for
you.
Disabled
The BIOS will not detect these categories.
SATA Mode
IDE
This option configures the Serial ATA drives in IDE mode.
RAID
This option enables the RAID function for Serial ATA
drives.
AHCI
This option configures the Serial ATA drives in AHCI
mode.
Legacy Mode Support
The options are Enabled and Disabled.
