www.dfi .com
44
Chapter 3 BIOS Setup
Chapter 3
Security
Set Administrator
Password.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Save & Exit
Chipset
Advanced
Main
Boot
Security
Administrator Password
Sets the administrator password.
User Password
Sets the user password.
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save Changes and
Reset
ESC: Exit
Save & Exit
Reset the system after sav-
ing the changes.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Chipset
Advanced
Main
Boot
Security
Save & Exit
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save Changes and
Reset
ESC: Exit
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will ap-
pear. Select Yes to reset the system after saving all changes made
.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will ap-
pear. Select Yes to reset the system setup without saving any changes.
Save Changes
Save the changes done so far to any of the setup options
.
Discard Changes
Discard changes done so far to any of the setup options
.
Restore Defaults
To restore and load the optimized default values, select this field and then press <En-
ter>. A dialog box will appear. Select Yes to restore the default values of all the setup
options.
