70
3
Award BIOS Setup Utility
VGA
When set to On, the system will respond and wake up to any
VGA activity.
LPT & COM
Select the port you would like the system to respond and wake
up when an event occurs on that port.
HDD & FDD
When set to On, the system will respond and wake up to any
hard drive or floppy drive activity.
PCI Master
When set to On, the system will respond and wake up to any
PCI or bus master activity.
PowerOn by PCI Card
Enabled
This field should be set to Enabled only if your
PCI card such as LAN card or modem card uses
the PCI PME (Power Management Event) signal to
remotely wake up the system.
Access to the LAN
card or PCI card will cause the system to wake
up.
Refer to the card’s documentation for more
information.
Disabled
The system will not wake up despite access to
the PCI card.
Resume On LAN/Ring
This field supports two functions.
•
When enabled, the system will power-on to respond to calls
coming from an external modem.
•
When enabled, the LAN card in the system will allow the net-
work to power-on a Soft Power Down (Soft-Off) PC. How-
ever, if your system is in the Suspend mode, you can wake up
the system only through an IRQ or DMA interrupt. Your LAN
card must support the remote wake up function.
Содержание AZ30-TC
Страница 1: ...AZ30 TC AZ30 TL Rev A System Board User s Manual 67920432 ...
Страница 107: ...C Troubleshooting 107 ...