www.dfi.com
29
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
Audio Controller
[Enable]
Advanced
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Audio Configuration
This section configures the audio settings.
Enable/Disable HD-Audio
Support
Audio Controller
Control the detection of the high-definition audio device.
Disable
HD Audio will be disabled.
Enable
HD Audio will be enabled.
SATA Configuration
This section configures the SATA controller.
Enables or Disables
the Chipset SATA
Controller.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
SATA Controller
SATA Configure As
SATA Interface Speed
SATA Port 0
Port 0
Hot Plug
SATA Port 1
Port 1
Hot Plug
Advanced
[Enable]
[AHCI]
[Gen3]
[Not Installed]
[Enabled]
[Disabled]
[Not Installed]
[Enabled]
[Disabled]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
SATA Controller
This field is used to enable or disable the Serial ATA controller.
SATA Configure As
The mode selection determines how the SATA controller(s) operates.
AHCI
This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Controller
Interface).
SATA Interface Speed
Select Serial ATA controller(s) speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s) or Gen 3
(6 Gbit/s).
SATA Port 0 and 1/Hot Plug
Enable or disable the Serial ATA port and its hot plug function.