DFI AL9A3, Руководство пользователя, Страница: 23 / 50

www.dfi .com Chapter 3 Hardware Installation
23
Chapter 3
3. Align the mounting holes of the heatsink with the mounting holes of the module. Use the
provided mounting screws to install the heat sink onto the module.
Long screws
Note:
The system board used in the following illustrations may not resemble the actual
board. These illustrations are for reference only.
1. COMe-LINK2 is the COM Express debug platform installed into COM Express Mini modules
for the application of debugging and displaying signals and codes.
COM Express
Connector
COM Express
Connector
Installing the COM Express Debug Card
2. Apply firm even pressure to the side with the COM Express connector first and push down
the entire module. Be careful when pressing the module to avoid damaging it. You will
hear a distinctive “click”, indicating the module is correctly locked into position.
Carrier board
AL9A3