DFI AK74-SC, Руководство пользователя

Страница: 38 / 87

2
38
Hardware Installation
2.7.16 AGP 4x LED and DIMM/PCI Standby Power LED
AGP 4x LED
This LED will light only when the
AGP slot is installed with a 4x AGP
add-in card.
DIMM Standby Power LED
This LED will turn red when the
system’s power is on or when it is
in the Suspend state (Power On
Suspend or Suspend to RAM). It
will not light when the system is in
the Soft-Off state.
PCI Standby Power LED
This LED will turn red when the system is in the power-on, Soft-Off
or Suspend (Power On Suspend or Suspend to RAM) state.
3.3VSB Standby for PCI (Jumper JP1)
The default setting of jumper JP1 is On. It provides 3.3VSB
Standby power to the PCI slots. If you are using a PCI modem
card that does not comply to the PCI 2.2 specification, please
set this jumper to Off. The PCI Standby Power LED’s light will
subsequently turn off.
Important:
Lighted LEDs serve as a reminder that you must power-off the
system then turn off the power supply’s switch or unplug the
power cord prior to installing any DIM modules or add-in cards.
1 2
On
1 2
Off
All manuals and user guides at all-guides.com