36
Chapter 3
BIOS SETTINGS
User's Manual |
ADS630-R680E/Q670E
36
Chapter 3
BIOS SETTINGS
36
Chapter 3
BIOS SETTINGS
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.22.1284. Copyright (C) 2022 AMI
Advanced
Check to enable render
standby support.
GT - Power Management Control
RC6(Render Standby)
[Enabled]
X
Advanced
X
GT - Power Management Control
RC6 (Render Standby)
Check to enable render standby support.
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.22.1284. Copyright (C) 2022 AMI
Advanced
PCH-FW Configuration
ME State
When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.
Manageability Features State
Enable or disable Intel(R) Manageability features. This option disables/enables Manageability
Features support in FW. To disable, support platform must be in an unprovisioned state first.
AMT BIOS Features
When disabled, AMT BIOS features are no longer supported and user is no longer able to ac-
cess MEBx Setup. This option does not disable manageability features in FW.
ME Unconfig on RTC Clear
When disabled, ME will not be unconfigured on RTC Clear.
►
Firmware Update Configuration
Configurate firmware update.
X
Advanced
ME State
Manageability Features State
AMT BIOS Features
ME Unconfig on RTC Clear
►
Firmware Update Configuration
[Enabled]
[Enabled]
[Enabled]
[Enabled]
When Disabled ME will be
put into ME Temporarily
Disabled Mode.
