20
English
2
English
Installing the RAID Driver While Installing Windows
®
XP or
Windows
®
2000
The steps below will instruct you on installing the 6300ESB RAID
driver while in the process of installing Windows
®
XP or Windows
®
2000 on a RAID 0 or RAID 1 Volume Serial ATA drives.
1. Start Windows Setup by booting from the installation CD.
2. Press <F6> when prompted at the beginning of Windows
setup.
3. Press <S> to select “Specify Additional Device”.
4. At this point you should be prompted to insert a floppy disk
containing the 6300ESB RAID driver. Insert the provided floppy
diskette.
5. Select “Intel
®
6300ESB SATA RAID Controller” from the list then
press <Enter>.
6. The next screen should confirm that you have selected the
Intel(r) RAID controller. Press <Enter> again to continue.
7. Finish the Windows installation. Leave the floppy disk in the
floppy drive until the system reboots itself. Windows setup will
need to copy the files from the floppy disk again after the RAID
volume is formatted, then Windows setup starts copying files.
