33
Connect the cable to JP8 and JP9 on the system board. The USB port
cables can be inserted only if pin 1 of the cable (red wire) is aligned with pin
1 of JP8 and JP9. Pin 5 of JP8 has been removed and the hole in the USB
cable connector, which corresponds to pin 5, has been plugged to prevent
incorrectly inserting the connector. Make sure “USB Controller” in the Inte-
grated Peripherals setup of the Award BIOS is Enabled.
USB port cables (optional)
IrDA Connector
The 586ITX system board is
equipped with an IrDA connector
for wireless connectivity between
your computer and peripheral de-
vices. Connect your IrDA cable to
connector CN4 on the 586ITX sys-
tem board. Make sure “Onboard IR
Controller” in the Integrated Periph-
erals setup of the Award BIOS is
Enabled. Carefully read this section
in Chapter 3 of this manual for in-
structions prior to using your IrDA
device.
Содержание 586ITX
Страница 1: ...586ITX Rev A SystemBoard User sManual 33370410...
Страница 12: ...12 BoardLayout square denotes pin 1...
