1260 Kempar
,
Madison Heights
, MI
48071
, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352
Email: [email protected] Website: www.dfgus.com
Picture 1
Picture 2
Determine Plastic comb binding element size
There are three methods you can use:
1. To use any size of comb you like, as long as the comb size is larger than book
thickness2.
2. To use coil that is 2 – 6 mm (1/8” to ¼”) larger than book thickness
3. To use our coil size selector. Please refer to the picture 3 (EtitanCoil machine
showed. only comb size up to 1 1/2” are showed)
Picture 3
A
B
Installation
1. Remove a screw (A) from binding shaft (see
picture 1) by a Philip (cross) head screwdriver.
2. Push binding handle (B) onto the binding shaft
(see picture 2).
3. Install the screw back
Put book on the table and under the
“Size Selector”.
Move the “Size Selector” down until
its bottom touches the top page of
sheet.
The point area of the “Size Selector”
will point the coil size you can use
