Dezac Rio CWAX3, Руководство пользователя

Страница: 6 / 46

6
Some waxes specify a specific temperature for use. The heater temperature can be adjusted using the UP and DOWN buttons before
pressing the start button.
ADJUSTING THE HEATER TEMPERATURE
DELAY TIMER
STEP 1
Press the Delay Timer button.
STEP 2
Use the UP and DOWN buttons to adjust the delay timer
to between 0.5 hours and 24 hours.
NOTE : To reset the temperature or delay timer while the unit is in use, p ress Start/Stop to deactivate the current setting, then use the UP and
DOWN buttons to adjust as above.
GETTING STARTED
STEP 1
Press the Start button and the unit will start heating. The heater will rapidly rise to the 90°C pre-set temperature.
STEP 2
Stir every 10 minutes until the wax is at the desired consistency for use.
STEP 3
Depending on the amount of wax being heated it will take between 30 and 60 minutes to heat the wax to
approximately 90°C. The wax temperature will then be maintained.
Connect the power cord to the unit and plug into the mains supply.
STEP 3
Press the Start/Stop button to set the time delay.
1