HBE3 M3 LE3/LS3 Installation Leaflet
DIL-0300-0068
Revision - B
25/04/2022
3.
Drill two holes and secure the side bracket with two
screws.
4.
Pass the cable through and wire directly into the
terminal block. Secure the mains cable using the
internal cable clamp.
5.
Connect the battery.
6.
Attach the top cover to the side bracket and secure
the fitting in place.
1.
Recessed
Make a cut-out in the ceiling using the dimensions
pictured.
2.
Remove the top cover and drill the cable entry hole in
the indicated location.
3.
Pass the cable through, and install the recessed
bracket.
4.
Pass the cable through and wire directly into the
terminal block. Secure the mains cable using the
internal cable clamp.
