Charging the Battery:
· The Socket for charging the battery is
located next to the seat.
· Connect the charger plug into the DC jack,
then plug the charger into a household
outlet.
· Charge the battery for 8-10 hours. Never
charge more than 20 hours.
· When the battery is fully charged, unplug the
charger and store it in a cool and dry place.
Operation of the Vehicle:
1.Make sure the battery is fully charged. Remove the seat and connect the
red plug to the battery plug before first use.
2.Locate the direction switch to the right of the steering wheel. Press the
direction switch to “F” and press the accelerator pedal, vehicle will move
forward. Headlights come on while moving forward.
3.To stop the vehicle remove foot from accelerator pedal. When stopped press
the direction switch to “B” then press the accelerator pedal, vehicle will move
backward.
NOTE: Do not change directions while vehicle is in motion.
4.Press the button in the center of the steering wheel for horn sound.
6
Step 6:
·
Insert the wing mirror (#8) into
the body.
wing mirror (#8)
6
10 washer(#11)
10 washer (#11)
Wheel insert (#12)
M8 nut (#6)
Wrench (#7)
Hub cap (#15)
M3.5x12 Pan head screw (#9)
Screwdriver (#17)
Rear wheel (#10)
rear axle spacer (#2)
rear axle
5
Step 5: Rear Left Wheel Assembly
·
Insert onto the rear left axle: M10
washer (#11), the rear axle spacer
%' '
' $%'
washer (#10) and M8 nut (#6).
·
Tighten the nut with wrench (#7).
Insert the hub cap (#15) onto the
wheel.
·
Tighten with 3xM3.5x12 pan head
screws (#4) with screwdriver (not
included).
