may change temperature selections of equal to or lower
priced temperature selections already inserted into
machine.
D. Insert coins, tokens or activate card reader to meet
displayed vending price. The washer will start, the
display will read PUSH and the green “on” led will
glow. The green start pushbutton must be pushed
to start cycle time countdown and machine starting
to run. “Door” will display if loading door is not
closed and handle locked.
E. If utilizing ADD PLUS CYCLE $.ooo option
The front display will scroll, ADD PLUS CYCLE
.25(example),amount to be added. User will have
1 minute to insert proper amount to activate this
option.
F. At the correct time in the wash bath cycle the green
“ADD BLEACH” light will come on indicating the time
and showing a diagram of the location for adding
bleach if desired. The timing is 2 1/2 minutes after
start of wash bath the light will come on and stay on
for 2 1/2 minutes or end of wash bath .
End of Cycle
When the cycle is completed, the end of cycle buzzer will
sound and the “on” light will go off. The loading door can
now be opened by turning the door handle to the indicated
position and pulling. Leave the clothes door open when the
machine is not in use. Also, at the end of cycle the display
will reset to the original amount required to start.
Detergent Measurements By
Washer Model
1/2 Cup
Mega Load T-900 Washer
Magnum Load T-1200 Washer
Maxi Load T-750 Washer
Mega Load T-950 Washer
Magnum Load T-1450 Washer
2/3 Cup
1/3 Cup
1/2 Cup
1/2 Cup
TRANSIENT VOLTAGE SURGE SUPPRESSORS
Like most electrical equipment your new machine can be damaged or have its life shortened by voltage
surges due to lightning strikes which are not covered by factory warranty. Local power distribution
problems also can be detrimental to the life of electrical components. We recommend the installation of
transient voltage surge suppressors for your new equipment. These devices may be placed at the power
supply panel for the complete installation and don’t require and individual device for each machine.
These surge protectors help to protect equipment from large spikes and also from small ongoing spikes
in the power that occur on a day to day basis. These smaller surges can shorten overall life of electrical
components of all types and cause their failure at a later date. Although they can’t protect against all
events, these protective devices have a good reputation for significantly lengthening the useful life of
electronic components.
Electronic Components are helped to have a longer useful life when they are supplied with the clean
stable electrical power they like.
We are including the following names and links to a few suppliers of these devices for those who don’t
currenty have a source.
MANUFACTURER
LINK
MCG
Surge
Protection
mcgsurge.com
Eaton
Corporation
eaton.com/us/en-us
Schneider
Electric
se.com/us/en
Asco
Power
Technolgies ascopower.com/us/en
Emerson
Electric
Co.
emerson.com/en-us
28
29
Part # 8533-073-001 3/22
Part # 8533-073-001 3/22
Machine
Mounting
Installation
& Operation
Programming
Trouble-
shooting
Machine
Service
Electrical
Wiring
Parts
Data
Coin
Handling
50Hz
Parts
Maintenance
Service Elec.
Compnents
