Dexter Laundry 350OS2.5, Инструкция по эксплуатации

Страница: 136 / 156

SANDER SAFETY WARNINGS
FR
ES
PT
IT
EL
PL
UA
RO
EN
2. SAFETY INSTRUCTIONS
136
a)
b)
c)
d)
e)
f)
g)
h)
a)
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
power tool’s operation.
If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Have your power tool serviced by qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
WARNING: Contact with or inhalation of harmful / toxic dusts arising from sanding painted
surfaces, woods and metals can endanger the health of operator and bystanders. Take
special care to guard against these dusts, including the following:
4. POWER TOOL USE AND CARE
5. SERVICE