Fig. 1
PLEASE READ ALL INSTRUCTIONS BEFORE USING
2
Thank you for purchasing the hand dryer. With greater emphasis on air flow and reduced
heat, the unit has high efficiency, with powerful concentrated air giving a short hand-dry me.
Please carefully read and understand these instruc ons before commencing installa on and
leave them with the user when installa on is complete. It is an ideal choice for hotels,
household and public places.
APPLICATION:
1. A er installa on of the hand dryer, connect the unit to power source and it will be in standby status.
2. When a hand reaches within 15cm range to the air outlet, the dryer will sense the hand and automa cally
start to blow warm air. (The lamp will also be on at the same me). Blow your hands with the warm air
un l they are dry. The unit will stop working a er con nuous opera on for 1 minute. To restart the unit,
put your hands again within the sensing range.
Important safety points
Ÿ
The Electrical installa on must be carried out by a qualified electrician in accordance with the current
edi on of the I.E.E. Wiring Regula ons.
Ÿ
This appliance must be earthed.
Ÿ
Means for electrical disconnec on must be incorporated in the fixed wiring in accordance with the
wiring rules.
Ÿ
Avoid spa ering the product with water.
Ÿ
The hand dryer must be fixed out of reach of a person taking a bath or shower.
Ÿ
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabili es or lack of experience and knowledge if they have been given supervision
or instruc on concerning use of the appliance in safe way and understand the hazard involved.
Children shall not play with the appliance. Cleaning and us1er maintenance shall not be made by
children without supervision.
Ÿ
Do not cover the air inlet or outlet.
INSTALLATION:
Recommended installa on height (measured from air outlet to the floor): for man 1.2m, for woman
Ÿ
1.1m, for child 0.9m.
A 2-pole switch with contact gap >3mm must be installed before connec on to power source.
Grounding wire must be connected to the unit.
Hand
Dryer
Fig. 2
Fig. 4
Fig. 3
An -the
screw hole
110~130V / 220 ~ 240V
Connector
Blower fan
Capacitance
Master
control plate
Temperature
control switch
Hea ng wire
POWER SCHEME
OVERHEAT PROTECTION
The heater is protected with an overheat protector that switches off the heater automa cally in case of
overheat. e.g. due to the total or par al obstruc on of the grills. In this case, unplug the appliance, wait
about 30 minutes for it to cool and remove the object which is obstruc ng the grills. Then switch it back on
as described above.
MAINTENANCE
Always isolate the appliance from the power supply before commencing any maintenance.
Never use abrasive chemicals or materials when cleaning the unit.
Use a vacuum cleaner to clear the inlet and outlet vents of any dust or debris.
3