GSM (FME M)
Serial Port
& IO (DB15)
1.
-
2.
-
3.
- RS485 - (-)
4.
- RS232 -TX
5.
- 1 -wire
6.
-
7.
- RS485 - (+)
8.
-
9.
- RS232 -RX
10.
- VCC out
11.
-
12.
- RS232-2 TX
13.
- RS232-2 RX/GPM
14.
- GND
15.
-
HD15 port pinout
LED indicator
SIM Card Reader
Ethernet (RJ45)
USB OTG (mini AB)
IEC Probe
WIFI Antenna
3G Antenna
WIFI (SMA F RP)
VCC
GND
Power supply
7,8cm
6,7cm
3,7cm
Connection diagram
Requirements
• DEXGate2
• Power supply
• Wifi Antenna
• 3G Antenna (only for DEXGate2-3G)
• A computer or tablet with wifi
• Ethernet network cable
• Network configuration data
• SIM Card (only for DEXGate2-3G)
1.
Connect the wireless antenna on the connector under the miniUSB port.
2.
Connect DEXGate2 to the Internet. You have 2 options:
a.
Ethernet: To connect the DEXGate 2 via Ethernet connect the Ethernet cable to DEX-
Gate2 and to the local network.
b.
GPRS/3G (only DEXGate2-3G): To connect the DEXGate2 to 3G, connect the 3G anten-
na into the connector. Then, insert the SIM into the slot on the top of the datalogger.
It is recommended that you disable the PIN of the SIM card from a mobile phone before
inserting it into the DEXGate2.
3.
Power on the DEXGate2 by connecting it through a Power Supply (7 to 50V DC).
1.
Wait about 1 minute and connect your laptop, smartphone or tablet to the WiFi network
called
DEXGATE_XXXXXXXXXXXX, where XXXXXXXXXXXX is the identifier of the DEXGate2.
2.
To access the network you must enter the password (the default password is the identifier
of your DEXGate2 in
capital letters)
3.
Open your Internet browser, go to http://172.16.0.1 and enter the username and password
(default for both is “admin”).
4.
Write down the device ID found on the menu “Status” at your DEXGate2 or at the sticker
on the device, which will be necessary to register the device in DEXCell Energy Manager (the
identifier has the format 00D09 ...).
1.
Ethernet: Go to
System > Ethernet and Enable DHCP* or disable it and enter the configu-
ration data of the network provided by your network administrator.
(* In case of doubt, ask your system administrator).
2.
GPRS/3G (only DEXGate2-3G): Go to
System>GPRS/3G, enable the connection and enter
the relevant data regarding the operator of the SIM.
• It is recommended that you disable the PIN of the SIM card from a mobile phone be-
fore inserting it into the DEXGate2
1.
DEXGate2 connection
2.
Access the administration portal
3.
Internet settings