MWP103-P1MH HP Wireless Optical Mobile Mouse
Page 7 of 12
1.0 Edition
standby mode.
Sleep mode – If the mouse is left intact for around 8 minutes, it goes to sleep
mode and shuts down the sensor to maintain minimum power consumption. No
moving operation is possible in this mode.
WAKE UP THE MOUSE
This mouse can work promptly under standby mode so users might not be able to tell the
existence of this mode. But, in sleep mode, users have to press any button to wake up the
mouse for normal operation.
RECEIVER STORAGE
For travel and loss prevention, store receiver in cavity on the bottom of the mouse.
Storing receiver:
To store in the mouse bottom, place USB plug end of receiver (A)
into place then snap bottom of receiver into position (B).
Receiver will now be locked into position.
Removing Receiver:
Using the tip of your finger, life receiver from USB plug end first
and remove from cavity. The USB is now active and ready to
be inserted into your computer’s USB port.
GENERAL SPECIFICATIONS
3 Buttons Wireless optical mouse.
