2 GB
J
Do not leave the packaging material lying around. Plastic parts etc. might become
a dangerous toy for children. There is a danger of death through suffocation!
Caution!
J
Please avoid exposing the device to the following: strong mechanical stresses,
extreme temperatures, strong vibrations, strong magnetic or electric fields.
J
Do not open the device. Maintenance is not necessary and repairs are not possible.
Fields of Application and Function
The light controller could help to deter burglars by indicating that you are at home by
switching lights on and off automatically.
To this purpose the light controller is screwed into the lamp socket and afterwards the
illuminant into the light controller.
Two types of simulation are possible:
j
Dusk to dawn switch:
When it becomes dark outside the light switches on
automatically (after a short delay) and switches off again at daybreak.
j
Random switch:
The random generator switches the light on and off automa-
tically during the night at irregular intervals. On average the light is illuminated
for about 80% of the time during the first half of the night and for about 20% of
the time during the second half.
The light can be switched on and off normally.
Requirements
The light controller should be used with a light socket with a E 27 socket and an appro-
priate illuminant which also has a E 27 cap. The light fitting must be controlled by a
switch and be voltage-free in the switched off condition.
Appropriate Illuminants:
j
Bulb, min. 40 W to max. 100 W (in the case of closed lampshades max. 60 W)
j
Energy-saving lamp, min. 7 W to max. 23 W
The following illuminants should not be used:
j
Lamps controlled by a dimmer switch
j
Lights recessed into the ceiling, flicker and glow lamps
Installation
1
Lamp socket
2
E 27 cap
3
Light controller
4
E 27 socket
5
Bulb
j
Before installation please turn off the light.
j
Before installation please turn off the power supply. Note the safety instructions.
j
Unscrew the existing bulb from the socket
1
.
j
Insert the light controller
3
with the bayonet cap
2
into the lamp socket
1
and turn in a clockwise direction.
j
Insert the bulb
5
into the socket
4
and turn in a clockwise direction.
1
2
3
4
5
AV4583_Zufallsschalter_Content_LB4A.indd 2
06.05.2008 12:16:23 Uhr
