3 GB/IE
4 GB/IE
Installation (see diagram)
o
Before installation please turn off the light.
o
Before installation please turn off the power supply. Note the safety instructions.
o
Unscrew the existing bulb from the socket
Q
.
o
Insert the light controller
E
with the bayonet cap
W
into the lamp socket
Q
and
turn in a clockwise direction.
o
Insert the bulb
T
into the socket
R
and turn in a clockwise direction.
c
Danger!
It is possible that when the light controller is used the distance to com-
bustible materials such as a lamp shade etc. will be reduced. Please ensure that
there is sufficient safety clearance!
If the lamp shade is closed the maximum power of the bulb must be 60 W!
Open lamp shade
Closed lamp shade
Please also note the instructions of the lamp manufacturer.
Operation
After installation of the light controller you can turn the light on and off as before.
Activation of the Dusk to Dawn Switch Function
o
Turn the light on and off and then on again quickly: The light flashes once briefly
as confirmation.
o
The dusk to dawn switch function is now activated.
After it has become dark outside and the automatic program delay of approximately
minutes has expired, the light controller automatically turns the light on. At daybreak
the light goes off automatically with a delay of up to 45 minutes.
When the light is switched on it is turned off automatically for about second
approximately every 45 minutes in order to check the surrounding brightness.
Activation of the Random Switch Function
o
Turn the light on and off and then on again immediately. The light flashes once
briefly as confirmation.
o
Turn the light off again and then on again. The light flashes twice briefly as
confirmation.
o
The random switch function is now activated.
When it becomes dark and the automatic program delay of approximately minutes
has expired, the random switch function is active. At daybreak the random switch
function is deactivated automatically with a delay of up to 45 minutes.
Deactivation of the Dusk to Dawn Switch Funktion / Random Switch Function
o
Turn the light off for at least 0 seconds.
o
The function is now deactivated.
Troubleshooting
Fault
Cause
Correction
There is no confirmati-
on, the set function
does not work properly
or not at all.
The desired func-
tion has not been
activated properly.
- Turn the light off.
- Wait at least 0 seconds.
- Turn on the desired function as
described under „Operation“.
Cleaning
Please ensure the following before cleaning
o
First of all, turn off the power supply.
o
Then remove the bulb
T
from the socket
R
.
o
Now remove the light controller
E
from the lamp socket
Q
.
o
Only now should you clean the light controller.
o
Please use a dry or slightly damp cloth (that has been soaked in a mild soapy
water solution if necessary) to clean the light controller. Petrol, thinning agents or
similar chemical substances should not be used.
o
The light controller must be completely dry before you reinsert it into the lamp so-
cket.
Disposal
Please dispose of the packaging material and any electrical devices at a disposal centre
of your local authority. According to European Directive 00 / 96 / EG pertaining to old
electrical and electronic devices and its implementation in national legislation, used
electrical devices must be collected separately and returned for environmentally friendly
recycling.
Guarantee
This product carries a 3-year guarantee from the date of purchase. Please retain the
sales voucher as proof of purchase. In the event of a claim under the guarantee please
telephone the service centre for your country to ensure that your goods can be returned
at no cost. This guarantee applies to the original purchaser only and is not transferable.
Furthermore, the guarantee is restricted to defects in material and manufacture only. This
product is not intended for commercial use.
The guarantee is void in the event of misuse or improper handling, the use of force or
interference unless carried out by the service centre. This guarantee does not limit your
statutory rights.
Service
Information on what to do in the event of a problem can be found on the Internet at
www.dexaplan.com. In the event of questions please contact our service centre by
e-mail ([email protected]) or telephone (
T
0870 - 4 309;
T
890 85 85;
Monday - Friday between 8.30 and 7.00) There you will obtain all the necessary infor-
mation about service procedures such as returning devices etc.
Dexaplan GmbH
Paul-Böhringer-Str. 3 · D-749 Oedheim
Last Information Update 0/006 · Ident.-No.: 0-006-SL 64- GB / IE
KOE30_T32_Content.indd 3-4
30.10.2006 15:56:21 Uhr
