DewStop breeze easy F100-1W, Руководство по установке

Страница: 14 / 20

Safety Information
12
1. Use only a 120V AC 60Hz power supply connection.
2. For indoor use only.
3. Do not exceed the control’s maximum electrical load ratings, as indicated on the product label.
4. Must be installed and used in accordance with your local electrical codes.
5. If a bare copper or green ground connection is not available in the wall box, contact a licensed electrician for
installation.
6. For use with permanently installed 120V AC powered fans only.
7. Use only #14 or #12 copper wire connections.
Turn OFF circuit breaker or remove fuse(s) and test that power is OFF before wiring. Wiring the control live can cause
serious risk of electrical shock and/or damage the control, voiding the warranty. FOR SAFETY, THIS PRODUCT
MUST BE INSTALLED IN A GROUNDED WALL ENCLOSURE. If you are unfamiliar with methods of installing
electrical wiring, secure the services of a qualified licensed electrician. USE ONLY COPPER WIRE, DO NOT use
aluminum wire with this device.
Read each step carefully and perform in sequence. The control will not work or will become damaged if wires are
connected incorrectly. To prevent damage, connect the control exactly as shown in the installation diagrams,
otherwise warranty will be voided. Prior to wiring, straighten or clip ends of wire such that ends of each wire are
straight (if using the control to replace an existing switch). Strip wire insulation at the end of each wire to expose
16 mm of copper. Where instructed to make a connection, twist ends of stripped wires together and
twist a proper connector clockwise until secure.