Dewhot 12lt, Руководство пользователя, Страница: 13 / 30

Page 13 of 30 Dewhot | Gas geyser manual
Dewhot | Gas geyser manual
Installation saftey instructions
1. Inspect the gas pipes and flexible hoses
regularly. If you find joints that are not
tightly secured or if there are cracks,
you should stop using the appliance and
perform the necessary maintenance.
2. Turn off the gas shut-off valve if your
gas geyser has been subjected to over
heating, fire, flood, physical damage
or if the gas supply fails to shut off.
3. Do not allow combustible materials
such as newspaper, rags or mops to
accumulate near the appliance.
4. Do not store or use petrol or other
flammable vapours and liquids, such
as adhesives or paint thinners, in the
vicinity of this or any other
gas appliance. If such flammables
must be used, open doors and
windows for ventilation.
5. Appliances in the vicinity should be
shut off to avoid vapours igniting
from the gas burner. Flammable
vapours can be drawn by air currents
from surrounding areas to the inlet of
gas geyser.
ADJUSTING THE OVER
PRESSURISATION VALVE (OPV)
FOR FREEZING TEMPERATURES
When you have done a new installation
and have connected the water, then you
can use a small or medium flat screw
driver to UNSCREW the grubscrew in the
hollow centre of the over-pressurisation
valve until the water drips out.
Then screw it BACK IN 1 full turn. This will
mean that the over-pressurisation valve
is set to the your specific water pressure
supply and in the event of the water in
the pipes freezing the valve will push out
a small amount of water and allow the
water to freeze in the geyser without
causing damage.