background image

14

GENERAL INFORMATION

 CAUTION

>  The system BIOS is protected by password. Any change in the BIOS may cause a system crash. When the system 

is booting, do not press ESC-button on keyboard. This may clear the BIOS settings and cause system faults.

>  Any change in the file structure as deleting or adding files or directories might cause a system crash.
>  Before installing software updates contact DEWETRON or your local distributor. Use only software packages 

which are released by DEWETRON. Further informations are also available in the internet (http://www.

dewetron.com).

>  After power off the system wait at least 10 seconds before switching the system on again. Otherwise the 

system may not boot correct. This prolongs also the life of all system components.

 

Windows updates and antivirus/security software

Before installing Windows software updates consult with DEWETRON for compatibility guidance. Please also keep in 

mind that the use of any antivirus or other security software may slow down your system and may cause data loss.

Problematic network stacks

Often intrusive IT software or network processes can interfere with the primary function of the DEWETRON system: to 

record data. Therefore we recommend strongly against the installation of IT/MIS software and running their processes 

on any DEWETRON data acquisition system, and cannot guarantee the performance of our systems if they are so 

configured.

Environmental Considerations

Information about the environmental impact of the product. 

Product End-of-Life Handling 

Observe the following guidelines when recycling a DEWETRON system: 

System and Components Recycling 

Production of these components required the extraction and use of natural resources. The substances 

contained in the system could be harmful to your health and to the environment if the system is improperly 

handled at it's end of life! Please recycle this product in an appropriate way to avoid an unnecessary pollution of the 

environment and to keep natural resources. 

 

This symbol indicates that this system complies with the European Union’s requirements according to Directive 

2012/19/EU on waste electrical and electronic equipment (WEEE). Please find further information about recycling on 

the DEWETRON website

 

www.dewetron.com

Restriction of Hazardous Substances 

This product has been classified as Monitoring and Control equipment, and is outside the scope of the 2011/65/EU 

RoHS Directive. This product is known to contain lead.

Содержание PUREC



























































Отзывы: