background image

Dewert User Manual 6000E and 6800E – Updated 05.2021/1 MDR                                                                Page 4 of 15 

The lying surfaces and the underframe are not anti-static as standard. 
 
Our products are not intended for use in wet rooms and must under no circumstances be cleaned using so-
called bed washers. This would irreparably destroy the product. 

 

The head part and armrests are only intended to support the patient and must not be used for sitting. 

 

If the underframe is designed with movability (optional), all the castors must always be locked before using 
the table.  
 
Do not put a damaged device into operation. 
 
Disconnect the device from the mains (power supply) in the event of a fault or during maintenance work. 
To disconnect, be sure to grasp the plug, not the power cable. 
 
This device must not be modified without the express permission of the manufacturer. 

 
 
1.8 Model designation and type labelling 

The exact model designation depends on the choice of frame colour:  

-03 white aluminium powder coated (RAL 9006); 
-04 grey aluminium powder coated (RAL 9007) 

 
The type plate is attached to the underframe on one long side of the table. It provides information about key 
table data. 
The following symbols are listed there (by way of example), their meanings are: 
 

 
Read the operating 
manual   

 
     Serial no. 

 
Applied part Type B  

                   
Caution, potential 
hazard 

 
Max. load 
capacity 

 
    CE mark 
 

 
Date of manufacture 

      
     Product may only  
     be used in dry  
                        rooms 

 
  Do not dispose of with  
  household waste 

 
Address of 
manufacturer 

 
        Protection class I 

 

 
 

1.9 Meaning of the serial number 

The serial no. is located on the type plate or is shown separately next to the type plate of the table. This 
number is unique and firmly linked to this specific individual product. It enables us to identify this table model 
and trace back assemblies/safety-relevant components at any time.  
Please always state this serial number when enquiring about spare parts.  
 
 

2. Operating manual 

 

2.1 Table design 

When designing the table frames, special emphasis was placed on functional and operational safety. The 
number of possible pinching points has thus been minimised, while remaining ones have been covered or 
protected with spacers to prevent injury, thus ensuring safe and yet simple operation. Nevertheless, 
necessary caution must always be exercised when using the table. 

 

 

 

Содержание 6000E Series
















Отзывы: