dewert okin LED-LICHTLEISTE, Руководство по установке

Страница: 11 / 18

LED-LICHTLEISTE Installation
80902(a) 25.11.2015 11
5.2.2 Mounting the LED-LICHTLEISTE at the application
There are various ways to connect the LED-LICHTLEISTE to your end product.
Attach the LED-LICHTLEISTE to the end product as shown in Figure 6 or Figure 7. Use the acces-
sories included with the delivery (the retaining clips with screws or the adhesive tape).
Proceed with the installation as follows:
Mounting method 1: With screws and retaining clip
1 Position the LED-LICHTLEISTE (c) properly on the end product (a) .
2 Mark the holes.
3 Drill the screw points in the end product.
4 Use two retaining clips (b) for each LED-LICHTLEISTE. Screw them onto your end product.
5 Press the LED-LICHTLEISTE into the retaining clips until it snaps in.
6 Carry out these steps for each LED-LICHTLEISTE.
Fig. 6: Mounting the LED-LICHTLEISTE with retaining clip
a
b
c