ECO BETADRIVE ECO
Installation
81417 3.0
15
5.
Installation
5.1
Safety notices to observe during installation
Basic safety rules must be followed in order to ensure that the end product can be continually op-
erated in a safe manner. The following rules must be observed while using the end product and
while installing the drive
Avoiding fatigue fractures
Install the drive in the end product so that it is properly aligned. This will help prevent shear
stress.
Do not position the drive at a slanted angle when installing it in the end product. A slanted angle
between the intended direction of movement of the end product and the drive's direction will
create shear stress and could lead to a fatigue fracture.
Be sure to install the drive so that it can always move freely in all operative states.
Avoiding an overrun of the stop point with the end product
Your end product should contain mechanical end stops. These will limit the drive movement and
significantly increase operational safety. DewertOkin recommends that you build such mechani-
cal end stops into your end product.
Be sure that your operating instructions inform the user of these points.
