30
EngLIsh
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See
Technical Data
for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge
D
e
WALT
battery packs only with designated
D
e
WALT
chargers. Charging battery packs other than
the designated
D
e
WALT
batteries with a
D
e
WALT
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCS491 operates on an 18 volt or 54 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548. Refer to
Technical
Data
for more information.
Package Contents
The package contains:
1 Shear
1 Hex wrench
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
On/Lock-Off Control
Date Code Position (Fig. A)
The date code
11
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2020 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Trigger switch/variable speed switch
2
Swivel head shear
3
On/Lock-off control button
4
Hex wrench
5
Battery pack
6
Battery release buttons
7
Rotating collar
8
Collar release button
9
LED worklight
Intended Use
These shears are designed for professional cutting of steel,
aluminium (max 1.3 mm) and stainless steel (max 1.0 mm).
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
These shears are professional power tools.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
