DeWalt XR LI-ION DCS320-XE, Инструкция по эксплуатации

Страница: 10 / 16

8
COMPONENTS (FIG. 2)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Trigger switch
E. Hand grip
B. Lock-off button F. Battery pack
C. Blade clamp release lever G. Battery release button
D. Shoe
Variable Speed Trigger Switch (Fig. 3)
LOCK-OFF BUTTON AND TRIGGER SWITCH
Your saw is equipped with a lock-off button (B).
To lock the trigger switch, press the
A
FIG. 3
B
UNLOCKED
LOCKED
lock-off button as shown in Figure 3.
Always lock the trigger switch (A) when
carrying or storing the tool to eliminate
unintentional starting. The lock-off button
is colored red to indicate when the
switch is in its unlocked position.
To unlock the trigger switch, press the
lock-off button as shown in Figure 3. Pull
the trigger switch to turn the motor ON.
Releasing the trigger switch turns the
motor OFF.
WARNING: This tool has no provision
to lock the switch in the ON position, and should never be locked ON by any other
means.
The variable speed trigger switch will give you added versatility. The further the trigger
is depressed the higher the speed of the saw.
CAUTION: Use of very slow speed is recommended only for beginning a cut.
Prolonged use at very slow speed may damage your saw.
Storage Recommendations
1. The best storage place is one that is cool and dry, away from direct sunlight and
excess heat or cold.
2. For long storage, it is recommended to store a fully charged battery pack in a
cool dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery
pack will need to be recharged before use.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
B
E
D
A
C
F
G
FIG. 2