DeWalt XR DWH161, Руководство пользователя

Страница: 11 / 28

9
English
Intended Use
Your DWH161 cordless dust extractor can be used for mobile
operation to take up dry, non-combustable dusts. Only for
indoor use.
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT pick up materials that present a risk of explosion,
glowing or burning materials, flammable materials, gases or
other hazardous substances.
nOTE: This appliance is suited for professional and commercial
use, e.g. in hotels, schools, hospitals, factories, shops, offices,
rental companies, and on construction sites.
• This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge.
• Children should be supervised to ensure that they do not
play with the appliance.
D
e
WALT Bluetooth® Tool Tag Ready (Fig. H)
Optional Accessory
WARNING: Read instruction manual for the D
e
WALT
Bluetooth ® Tool Tag.
WARNING: Turn dust extractor off and disconnect battery
pack before installing the D
e
WALT Bluetooth ® Tool Tag.
WARNING:
When installing or replacing the D
e
WALT
Bluetooth ® Tool Tag, use only the screws provided. Be sure
to securely tighten the screws.
Your dust extractor comes with mounting holes 17 for
installing a D
e
WALT Bluetooth
®
Tool Tag (DCE041). Use only the
original fasteners included with the tool tag. You will need a T15
(Torx) bit tip to install the tag. The
D
e
WALT Tool Tag is designed
for tracking and locating professional power tools, equipment,
and machines using the
D
e
WALT Tool Connect™ app. For proper
installation of the D
e
WALT Tool Tag refer to the D
e
WALT Tool
Tag manual.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn the dust extractor off and disconnect
battery pack before making any adjustments or
removing/installing attachments or accessories.
An
accidental start-up can cause injury.
WARNING: Use only D
e
WALT battery packs and chargers.
Inserting and Removing the Battery Pack
from the Dust Extractor (Fig. B)
nOTE: Make sure your battery pack 1 is fully charged.
To Install the Battery Pack into the Dust Extractor
1. Align the battery pack 1 with the rails inside the dust
extractor (Fig. B).
2. Slide the battery pack in until it is firmly seated in the dust
extractor and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button 2 and firmly pull the battery pack
out of the dust extractor.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D
e
WALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button
15 . A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
nOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Attaching the Carry Strap (Fig. C)
Your dust extraction system comes with a carry strap 10 that
can be connected to the carry strap hooks 11 in either manner
as shown in Fig. C.
Attaching the Crevice Tool (Fig. A)
• To attach the crevice tool 12 to the dust extractor hose 6 ,
insert the end of the dust extractor hose into the open end
of the accessory with a twisting motion until tight.
nOTE: The dust extraction hose is not compatible with
AirLock
®
connectors.
• To remove the crevice tool, hold the dust extraction hose
and pull the accessory off using a twisting motion.
Installing the Belt Hook (Fig. H)
WARNING: To reduce the risk of serious personal
injury, turn the dust extractor off and disconnect
battery pack before making any adjustments or
removing/installing attachments or accessories.
An
accidental start-up can cause injury.
WARNING: To reduce the risk of serious personal
injury, ONLY use the tool’s belt hook to hang the dust
extractor from a work belt. DO NOT
use the belt hook
for tethering or securing the dust extractor to a person
or object during use.
DO NOT suspend dust extractor
overhead or suspend objects from the belt hook.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook
is secure.
iMPORTAnT:
When attaching or replacing the belt hook 18 ,
use only the screw 13 that is provided. Be sure to securely
tighten the screw.
If the hook is not desired at all, it can be removed from the
dust extractor.