background image

DEFINITIONS 

The definitions below describe the level of severity for each signal word:

DANGER

: Indicates an imminently hazardous situation which, if not 

avoided, will result in death or serious injury.

WARNING

: Indicates a potentially hazardous situation which, if not avoided, 

could result in death or serious injury.

CAUTION

: Indicates a potentially hazardous situation which, if not avoided, 

may result in minor or moderate injury.

NOTICE

: Indicates a practice not related to personal injury which, if not 

avoided, may result in property damage.

 WARNINGS 

DO NOT

 use under wet conditions or in presence of flammable liquids or gases.

• This impact wrench is a professional power tool. 

DO NOT

 let children come into

contact with the tool. Supervision is required when inexperienced operators use

this tool.

• Never modify the power tool or any part of it. Damage or personal injury could result.

SAFETY

To ensure safe operation and service of the wrench, follow these instructions. Failure 

to observe these warnings can result in electric shock, fire, severe injury or death.

1) Work Area Safety:

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание Klein Tools BAT20-CD























Отзывы: