background image

12

English

NOTE: 

Using pump guard helps provide proper lubrication to the 

internal seals of the pump regardless of temperature or environment. 

NOTICE: 

Risk of property damage. Use only SIMPSON

®

 / 

POWERWASHER

TM

 Pump Guard or equivalent. Other products could 

be corrosive and/or contain alcohol which may cause pump damage.

  1. Turn off pressure washer and disconnect hoses from pump.
  2. Unscrew bottle valve from Pump Guard bottle and remove seal. 
  3. Screw bottle valve back onto bottle.
  4. Attach bottle to water inlet of pump.
  5. Squeeze bottle to inject contents into pump.
 6. With ignition switch off, simultaneously pull starter rope and 

squeeze bottle. Repeat until protector fluid exits pump outlet. 

NOTE: 

This step may require two people.

Pressure Washer

 1.  Drain all water from high-pressure hose, coil it and store it in 

cradle of the pressure washer handle.

 2. With nozzle pointed down and the spray gun and wand in a  

vertical position, squeeze trigger to drain all water from spray gun 

and wand. Store in gun holder.

  3. Store chemical hose so it is protected from dam age.
 4. Store the machine and accessories in a dry, climate controlled 

environment. Do not store the machine or accessories in a place 

where the temperature could drop below 40 °F (4 °C). 

CAUTION:

 Risk of personal injury. Avoid placing hands between 

handle and frame when assembling to prevent pinching.

NOTICE: 

 Risk of property damage. Always store and transport unit 

in an upright position. 

ACCESSORIES

Recommended accessories for use with your tool are available for 

purchase from your local dealer or authorized service center. If you 

need assistance in locating any accessory for your tool, please contact 

the FNA Group at www.dewaltpw.com, 1825 Greenleaf Avenue, Elk 

Grove Village, Il 60007, or call 1 (877) 362 4271.

DANGER: 

Risk of fluid injection. When using replacement lances 

or guns with this pressure washer, DO NOT use a lance and/or lance/

gun combination that is shorter in length than what was provided with 

this pressure washer as measured from the nozzle end of the lance to 

the gun trigger.

WARNING: 

The use of any other accessory not recommended 

for use with this tool could be hazardous. Use only accessories rated 

equal to or higher than the rating of the pressure washer.

SERVICE INFORMATION

Please have the following information available for all service calls: 

Model Number ____________ Serial Number ___________ 

 

Date and Place of Purchase ___________________________________

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance 

and adjustment should be performed by a FNA factory service center, 

a FNA authorized service center or other qualified service personnel. 

Always use identical replacement parts.

Limited Warranty

The manufacturer of this product agrees to repair or replace designated 

parts that prove defective within the warranty period listed below at the 

manufacturer’s sole discretion. Specific limitations/extensions and 

exclusions apply. 

Содержание DXPW2000E

















Отзывы: