6
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
English
Storage
When not in use, the heater must be disconnected from power source, dusted off and the cord should
be loosely wound around the handle.
For service :
Please call Toll-Free 855-805-5745 www.dewalt.com
Our office hours are 8:00 AM – 5:00 PM, EST, Monday through Friday.
Please include the model number, date of purchase, and description of problem in all communication.
WARNING: USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. RE-
PLACEMENT PARTS ARE ONLY AVAILABLE DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE AGENCY.
Troubleshooting
Unit does not work
• Defective thermostat or wrong thermostat setting
•
Open
circuit
breaker
or
fuse
•
Thermal
overload
switch
has
been
tripped
•
Faulty
Connection
•
Damaged
or
defective
plug
or
outlet
Unit runs continuously
• Defective thermostat or wrong thermostat setting
• Heat losses higher than unit capacity (unit undersized)
Elements are on but motor does not rotate
• Defective Motor
•
Blocked
fan
blades
Enclosure is extremely hot
• Defective thermal protection
•
Blocked
air
vents
•
Defective
motor
Desired room temperature cannot be reached
• One or more elements are defective
•
Defective
thermostat
or
wrong
thermostat
setting
• Voltage lower than that written on Rate tag
• Heat losses higher than unit capacity (unit undersized)
Overheating
• Defective thermostat or wrong thermostat setting
•
Defective
Motor
Heater emits a humming sound
• Defective motor
•
Fan
blade
blocked
Note: Your heater is equipped with auto cool down and warm-up features.
AUTO COOLDOWN.
When the heater is running and the selector switch is rotated to the off position,
the heater will automatically keep the fan operating until the heater is cool. The
fan will then shut off.
AUTO WARM-UP.
When the heater is stored or started in very cold conditions and a heating mode
is selected, the heating element will turn on to warm up the unit before the fan
will start to blow hot air.
