DeWalt DXGSE, Руководство оператора

Страница: 13 / 104

13
ENGLISH
5. Push the attachment straight into the
coupler (Fig. 2) until the release button
snaps firmly into the primary hole (Fig. 3).
6. Turn the knob clockwise to tighten the
coupler (Fig. 1).
Removing the Attachment
1. Set the unit on a flat, level surface.
2. Turn the knob counterclockwise to loosen
the coupler (Fig. 1).
3. Press and hold the release button (Fig. 3).
4. Pull the attachment straight out of the
coupler (Fig. 2).
Fig. 1
Knob
Tighten
Loosen
ASSEMBLY
Installing and Removing the
Attachment
The coupler enables the use of various optional
attachments.
Installing the Attachment
1. Remove the hanger cap from the
attachment. Keep the hanger cap for use
when storing the attachment. If present,
remove the gray spacer from the coupler.
2. Set the unit on a flat, level surface.
3. Turn the knob counterclockwise to loosen
the coupler (Fig. 1).
4. Align the release button with the guide
recess (Fig. 3).
WARNING:
Before using any
attachment, read and understand
the manual that came with the
attachment. Follow all safety
information contained within.
WARNING:
To avoid serious
personal injury and damage to the
unit, shut the unit off before
removing or installing an attachment.
WARNING:
Before operating the
unit, make sure the release button is
fully snapped into the primary hole
and the knob is securely tightened.
WARNING:
Unless specified
otherwise, the release button should
be snapped into the primary hole
only. Using the wrong hole could
lead to personal injury or damage to
the unit.