DeWalt DXGNR4000, Инструкция по эксплуатации

Страница: 9 / 24

Owner’s Manual for Portable Generator 7
Assembly
Unpacking
• Remove all packaging material.
• Remove separate accessory kit box.
• Remove generator from carton.
Accessories
Check contents against the list in Contents . If any parts
are missing or damaged, or if any problems occur during
assembly, call the Generator Helpline at 1-888-431-6871.
Contents
Install Accessory Kits
The generator requires some minor assembly before
use.
Tools Required
Obtain the following tools:
• Two 12mm and one 13mm box wrenches
Install Wheel Kit
The wheels are specially designed to enhance portability.
The wheels are not intended for over-
the-road use.
1.
Slide axle pin (J) through wheel, 1/2” flat washer (E), and
wheel bracket on frame.
2.
Insert cotter pin (D) and bend tabs to lock in place.
Install Frame Foot and Rubber Bumpers
1.
Slide M8 bolt (G) through holes in frame rail. Slide frame
foot (B) onto M8 bolts. Install locking flange nuts (H).
Install Handle
1.
Slide M8 carriage bolt (F) through handle bracket and han-
dle assembly (C) by first inserting the bolt through the
square hole in the handle assembly (C).
2.
Install M8 acorn nut (K).
Item Qty.
Generator 1
Owner’s Manual 1
Product Registration Card
(English, Spanish, and French)
3
Service and Emissions Warranty 1
SAE 30 Oil 1
Oil Funnel 1
Wheel (A) 2
Frame Foot (B) 2
Handle Assembly (C) 1
Hardware Bag
Cotter Pin (D) 2
1/2” Flat Washer (E) 2
M8 Carriage Bolt (F) 2
M8 Bolt (long) (G) 4
M8 Hex Flange Nut (H) 4
1/2” Axle Pin (J) 2
M8 Acorn Nut (K) 2
Spark Plug Wrench 1
NOTICE:
003604
E
C
D
A
J
H
G
B
F