background image

Wires alignment

Battery connector

1

2

Remove Holster

Backlit LCD Display

Features

•  22 Channels

•  121 Privacy Codes 

 

  (38 CTCSS codes/ 
  83 DCS codes)

•  IP67 Water Proof and  

  Dust Proof Rating

•  Hands-Free Operation  

 (VOX)

•  Backlit LCD Display

•  Call Alert 

•  Button Lock

•  Speaker/ Microphone/ 

  Charge Jack

•  Roger Beep  

•  Battery/Power Saver 

•  Keystroke Tones

•  Battery Level  

 Indicator

•  Low Battery  

  Audible Alert

•  Auto Squelch

•  Holster

1

2

1

2

3

4

5

10

11

9

7

8

6

1.  Lock Icon

2.  Transmit Icon

3.  Receive Icon

4.  Battery Level Indicator

5.  VOX Icon

6.  DCS Icon

7.  CTCSS Icon

8.  DCS / CTCSS Privacy 

Code Numbers

9.  Power Saver Icon

10. Vibra Alert Icon

11. Channel Numbers

Battery Door Screws

O

-r

ing

Caring for Your Radio 

 

Your radio will give you years of trouble-free service if cared for properly. 

Handle the radio gently. Keep the radio away from dust. Never put the radio in 

water or in a damp place. Avoid exposure to extreme temperatures. 

Installing Batteries 

1. Remove Holster by releasing the belt clip latch and slide 

the holster downward.

2. Unscrew 3 screws at battery door with a proper 

screwdriver, then open the battery compartment cover. 

Connect the battery connector in proper polarity.

3. Place the battery inside battery compartment and align 

the wires as shown. 

  Ensure the battery connector with cables are tucked 

into the hole located at bottom.

  (Note: Wires are required to be tucked into the battery 

compartment completely and carefully. If any object 

interfere the O-ring, its sealing performance will be 

affected.)

4. Place the battery compartment cover, screw down the 

screws mildly.

  (Screw nuts may be damaged if overtighten)

5. Re-attach the holster

To charge batteries in radio:
1.

 Check to see that the batteries have been inserted properly. 

2.

 Insert the cable into the charge jack located atthe left side of the radio. 

3.

 Plug the cable into USB-compatible power port.

 
Only use the supplied rechargeable batteries and desktop charger for 

recharging your D

E

WALT radio.

D

E

WALT recommends your radio is turned off while being charged.

Содержание DXFRS800













Отзывы: