Communicating with Another Person
1.
Press and hold the
Talk
button.
2.
Position the microphone about 6 inches from your
mouth, speak in a normal voice.
3.
Release the
Talk
button when you are finished
talking and listen for a response.
You cannot receive incoming calls while pressing the
Talk
button.
To Select a Channel
To change the channel, press
Power / Menu
button
once, the current channel number prompted. Then,
press the
+
or
–
buttons to select your channel, and
you can:
1. Fast press to skip voice prompting of every channel
number
2. Press and hold for fast skipping
It will exit the channel selection mode if there is no
+
or
-
button pressing for 5 sec. Or simply press
Power
/ Menu
button or
Talk
button once to return to
standby mode immediately.
Power/Menu Button
Up & Down Button
Up & Down Button
Battery Low
3
4
Turning on Your Radio
Press and hold
Power/Menu
button for 4 seconds to turn the radio on or off.
When green LED flashes every 5 seconds, your radio is now in
Standby
mode, ready to receive transmissions.
The radio is always in
Standby
mode except when the
Talk
or
Power/
Menu
buttons are pressed.
Battery Low
Red LED flashes every 5 seconds. Voice prompt
“
Please charge
” will be heard approximately 30
minutes before device automatically powers off.
Auto Battery Save
If there are no transmissions within 10 seconds, the radio will automatically
switch to
Battery Save
mode. This will not affect the radio’s ability to
receive incoming transmissions.
Listening for a Response
Release the
Talk
button to receive incoming transmissions. Your radio is
always in
Standby
mode while the
Talk
button is not pressed.
To Adjust Volume
Press the
+
or
–
button to increase or decrease the
volume. There are 12 different volume levels.
Do not hold the radio close to your ear. If the volume is
set to an uncomfortable level, it could hurt your ear.
Talk Button
Both radios must be tuned to the same
channel and privacy code to communicate.
