DeWalt DWE7491-XE, Инструкция по эксплуатации

Страница: 10 / 12

Optional Accessories
WARNING: Since accessories, other than those offered by D
E
WALT, have not been tested with this product, use
of such accessories with this tool could be hazardous. To reduce the risk of injury, only D
E
WALT, recommended
accessories should be used with this product.
Replace blade guard when worn. Contact your local D
E
WALT service centre for details on a blade guard
replacment.
SAW BLADES: ALWAYS USE 254 mm noise reduced saw blade with appropriate sized clamp washer for blade
hole and 16 mm saw arbour. Blade speed rating must be at least 5000 RPM. Never use a small diameter blade.
Never use a smaller diameter blade. It will not be guarded properly.
BLADE DESCRIPTIONS
APPLICATION DIAMETER TEETH
Construction Saw Blades (fast rip)
General Purpose 254 mm 24
Fine Crosscuts 254 mm 40
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts 254 mm 60
Consult your dealer for further information on the appropriate accessories.
WARNING: Since accessories, other than those offered by D
E
WALT, have not been tested with this product, use
of such accessories with this tool could be hazardous. To reduce the risk of injury, only D
E
WALT recommended
accessories should be used with this product.
Recommended accessories for use with your tool are available at extra cost from your local service center. If you
need any assistance in locating any accessory, please contact Stanley Black & Decker, 82 Taryn Drive, Epping,
VIC 3076 Australia or call 1800 338 002 or (NZ) 0800 339 258.
WARNING: Sharp edges.
Unwanted Tools and the Environment
Take your tool to an authorized DEWALT repair agent where it will bedisposed of in an environmentally safe way.
Service Information
Please have the following information available for all service calls:
Model Number _________________ Serial Number _________________
Date and Place of Purchase ____________________________________
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and
replacement) should be performed by certified service centers or other qualified service organizations, always
using identical replacement parts.
10