DeWalt DW083-XE, Инструкция по эксплуатации

Страница: 9 / 12

7
SPECIFICATIONS
Light Source Semiconductor laser diode
Laser Wavelength 630–680 nm Visible
Laser Power <1mw (each beam) CLASS 2 LASER PRODUCT
Working Range 30 m (±100')
Accuracy* (Up) ±6 mm @ 30 m (± 1/4" @ 100')
Accuracy* (Level) ±6 mm @ 30 m (± 1/4" @ 100')
Indicators
Flashing Indicator: battery low
Flashing Laser: tilt range exceeded
Power Source 4 AA Size Batteries (6.0V DC)
Operating
Temperature
-10 °C to 50 °C (20 °F to 120 °F)
Storage
Temperature
-20 °C to 60 °C (-5 °F to 140 °F)
Environmental Water Resistant
*Accuracy spec assumes laser is positioned on a surface within 4° of level.
Accessories
WARNING: Since accessories, other than those offered by D
E
WALT, have not been
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
E
WALT recommended accessories should be used
with this product.
Recommended accessories for use with your tool are available at extra cost from
your local service center. If you need any assistance in locating any accessory, please
contact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call
1800 444 224 or (NZ) 0800 339 258.