background image

English

7

battery pack has reached an appropriate temperature, the 
yellow light will turn off and the charger will resume the 
charging procedure.

The compatible charger(s) will not charge a faulty battery 
pack. The charger will indicate faulty battery pack by 
refusing to light or by displaying a problem pack or charger 
blink pattern.

nOTE:

 This could also mean a problem with a charger.

If the charger indicates a problem, take the charger and 
battery pack to be tested at an authorized service center.

hot/Cold Pack Delay

When the charger detects a battery pack that is too hot 
or too cold, it automatically starts a Hot/Cold Pack Delay, 
suspending charging until the battery pack has reached an 
appropriate temperature. The charger then automatically 
switches to the pack charging mode. This feature ensures 
maximum battery pack life.
A cold battery pack will charge at a slower rate than a warm 
battery pack. The battery pack will charge at that slower rate 
throughout the entire charging cycle and will not return to 
maximum charge rate even if the battery pack warms.
The DCB118 charger is equipped with an internal fan 
designed to cool the battery pack. The fan will turn on 
automatically when the battery pack needs to be cooled.
Never operate the charger if the fan does not operate 
properly or if ventilation slots are blocked. Do not permit 
foreign objects to enter the interior of the charger.

Electronic Protection system

Li-Ion tools are designed with an Electronic Protection 
System that will protect the battery pack against 
overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic 
Protection System engages. If this occurs, place the lithium-
ion battery pack on the charger until it is fully charged.

Wall Mounting

DCB107, DCB112, DCB113, DCB115, DCB118, DCB132

These chargers are designed to be wall mountable or to 
sit upright on a table or work surface.  If wall mounting, 
locate the charger within reach of an electrical outlet, 
and away from a corner or other obstructions which may 
impede air flow. Use the back of the charger as a template 
for the location of the mounting screws on the wall. Mount 
the charger securely using drywall screws (purchased 
separately) at least 1" (25.4  mm) long, with a screw head 
diameter of 0.28–0.35" (7–9 mm), screwed into wood to an 
optimal depth leaving approximately 7/32" (5.5 mm) of the 
screw exposed. Align the slots on the back of the charger 
with the exposed screws and fully engage them in the slots.

Charger Cleaning Instructions

 

WARNING: 

Shock hazard. Disconnect the charger 

from the AC outlet before cleaning. Dirt and grease 
may be removed from the exterior of the charger using 
a cloth or soft non-metallic brush. Do not use water or 
any cleaning solutions.

Important Charging Notes

1.  Longest life and best performance can be obtained if 

the battery pack is charged when the air temperature is 
between 65 °F and 75 °F (18 ° – 24 °C). DO NOT charge 
the battery pack in an air temperature below +40 °F 
(+4.5 °C), or above +104 °F (+40 °C). This is important 
and will prevent serious damage to the battery pack.

2.  The charger and battery pack may become warm to the 

touch while charging. This is a normal condition, and 
does not indicate a problem. To facilitate the cooling of 
the battery pack after use, avoid placing the charger or 
battery pack in a warm environment such as in a metal 
shed or an uninsulated trailer.

3.  If the battery pack does not charge properly:

a.  Check operation of receptacle by plugging in a lamp 

or other appliance;

b.  Check to see if receptacle is connected to a light 

switch which turns power off when you turn out the 
lights;

c.  Move the charger and battery pack to a location 

where the surrounding air temperature is 
approximately 65 °F – 75 °F (18 ° – 24 °C);

d.  If charging problems persist, take the tool, battery 

pack and charger to your local service center.

4.  The battery pack should be recharged when it fails to 

produce sufficient power on jobs which were easily 
done previously. DO NOT CONTINUE to use under these 
conditions. Follow the charging procedure. You may 
also charge a partially used pack whenever you desire 
with no adverse effect on the battery pack.

5.  Foreign materials of a conductive nature such as, but 

not limited to, grinding dust, metal chips, steel wool, 
aluminum foil, or any buildup of metallic particles 
should be kept away from charger cavities. Always 
unplug the charger from the power supply when there 
is no battery pack in the cavity. Unplug the charger 
before attempting to clean.

6.  Do not freeze or immerse the charger in water or any 

other liquid.

Storage Recommendations

1.  The best storage place is one that is cool and dry, away 

from direct sunlight and excess heat or cold.

2.  For long storage, it is recommended to store a fully 

charged battery pack in a cool dry place out of the 
charger for optimal results.

nOTE:

 Battery packs should not be stored completely 

depleted of charge. The battery pack will need to be 
recharged before use.

SAVE THESE INSTRUCTIONS FOR 

FUTURE USE

COMPONENTS (FIG. A)

 

WARNING: 

Never modify the power tool or any part 

of it. Damage or personal injury could result.

Refer to Figure A at the beginning of this manual for a 
complete list of components.

Содержание DCS367B












Отзывы: