![background image](http://html.mh-extra.com/html/dewalt/dcmcs574/dcmcs574_original-instructions-manual_86646045.webp)
43
EnGLIsh
Inserting and Removing the Battery Pack
from the Tool (Fig. D)
nOTE:
Make sure your battery pack
15
is fully charged.
To Install the Battery Pack into the Tool
1. Align the battery pack
15
with the rails inside the tool’s
battery housing
14
(Fig. D).
2. Slide it into the battery housing until the battery pack is
firmly seated in the tool and ensure that you hear the lock
snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
16
and firmly pull the
battery pack out of the tool.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. C)
Some
D
e
WALT
battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button
19
. A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING:
Use only
D
e
WALT
battery packs and chargers.
16
Battery release button
17
Wrench
18
Date code
Intended Use
The DCMCS574 chainsaw is designed for cutting logs up to
40 cm in diameter.
The DCMCS575 chainsaw is designed for cutting logs up to
45 cm in diameter.
DO nOT
use under wet conditions or in presence of flammable
liquids or gases.
These chainsaws are professional power tools.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Variable speed trigger switch
2
Lock-off lever
3
Chain brake / front hand guard
4
Guide bar
5
Saw chain
6
Sprocket cover
7
Bar lock nuts
8
Chain tensioning screw
9
Oil level indicator
10
Oil cap
11
Guide bar scabbard
12
Rear handle
13
Front handle
14
Battery housing
15
Battery Pack
Date Code Position (Fig. A)
The date code
18
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year and Week of Manufacture
g
Wear ear protection.
f
Wear eye protection
Wear head protection.
Wear gloves.
Wear proper foot protection.
Do not expose the tool to rain or high humidity or leave
outdoors while it is raining.
Contact of the guide bar tip with any object should
be avoided.
Rotational direction of the saw chain.
Always use two hands when operating the chainsaw.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from the tool.
Directive 2000/14/EC guaranteed sound power.
Содержание DCMCS574
Страница 1: ...DCMCS574 DCMCS575 ...
Страница 4: ...2 6 mm 5 4 5 4 21 20 22 Fig I Fig E Fig F Fig G Fig H Fig J Fig K 13 12 2 1 3 13 ...
Страница 206: ......
Страница 207: ......