background image

14

English

Cleaning

 WARNING:

 Blow dirt and dust out of all air vents with clean, dry air 

at least once a week. To minimize the risk of eye injury, always wear 

ANSI Z87.1 approved eye protection when performing this. 

 WARNING:

 Never use solvents or other harsh chemicals for 

cleaning the non-metallic parts of the tool. These chemicals may 

weaken the plastic materials used in these parts. Use a cloth 

dampened only with water and mild soap. Never let any liquid get 

inside the tool; never immerse any part of the tool into a liquid.

CHARGER CLEANING INSTRUCTIONS

 WARNING: 

Shock hazard. Disconnect the charger from the AC 

outlet before cleaning. Dirt and grease may be removed from the 

exterior of the charger using a cloth or soft non-metallic brush. Do 

not use water or any cleaning solutions.

Accessories

 WARNING: 

Since accessories, other than those offered by 

D

e

WALT, have not been tested with this product, use of such 

accessories with this tool could be hazardous. To reduce the risk of 

injury, only D

e

WALT recommended accessories should be used with 

this product. 

Recommended accessories for use with your tool are available at 

extra cost from your local dealer or authorized service center. If you 

need assistance in locating any accessory, please contact D

e

WALT 

Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286, call 

1-800-4-D

e

WALT (1-800-433-9258) or visit our website: www.dewalt.

com.

WARNING:

 Use only impact accessories. Non-impact accessories 

may break and cause a hazardous condition. Inspect accessory prior 

to use to ensure that it con tains no cracks.

Repairs

The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance 

and adjustment should be performed by a D

e

WALT factory service 

center, a D

e

WALT authorized service center or other qualified service 

personnel. Always use identical replacement parts.

Register Online

Thank you for your purchase. Register your product now for:
 • 

WARRANTY SERVICE:

 Registering your product will help you 

obtain more efficient warranty service in case there is a problem 

with your product.

 • 

CONFIRMATION OF OWNERSHIP:

 In case of an insurance 

loss, such as fire, flood or theft, your registration of ownership will 

serve as your proof of purchase.

 • 

FOR YOUR SAFETY: 

Registering your product will allow us to 

contact you in the unlikely event a safety notification is required 

under the Federal Consumer Safety Act.

Register online at www.dewalt.com/register.

Three Year Limited Warranty

D

e

WALT will repair, without charge, any defects due to faulty materials 

or workmanship for three years from the date of purchase. This 

warranty does not cover part failure due to normal wear or tool abuse. 

For further detail of warranty coverage and warranty repair information, 

visit www.dewalt.com or call 1-800-4-D

e

WALT (1-800-433-9258). 

This warranty does not apply to accessories or damage caused where 

repairs have been made or attempted by others. This warranty gives 

you specific legal rights and you may have other rights which vary in 

certain states or provinces.

Содержание DCF887B
















Отзывы: