26
EnGLIsh
EC‑Declaration of Conformity
Machinery Directive
Drill/Driver/Impact Drill
DCD780, DCD785
D
e
WALT
declares that these products described under
Technical
Data
are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-
1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice-President Engineering, PTE-Europe
D
e
WALT
, Richard-Klinger-Straße 11,
65510, Idstein, Germany
16.08.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
DRILL/DRIVER/IMPACT DRILL
DCD780, DCD785
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
DCD780
DCD785
Voltage
V
DC
18
18
Type
1/10
1/10
Battery type
Li-Ion
Li-Ion
No-load speed
1st gear
min
-1
0–600
0–600
2nd gear
min
-1
0–2000
0–2000
Impact rate
1st gear
min
-1
–
0–10200
2nd gear
min
-1
–
0–34000
Max. torque (hard/soft)
Nm
60/23
60/23
Chuck capacity
mm
13
13
Maximum drilling capacity
Wood
mm
38
38
Metal
mm
13
13
Masonry
mm
–
13
Weight (without battery pack)
kg
1.2
1.24
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L
PA
(emission sound pressure level)
dB(A)
87
87
L
WA
(sound power level)
dB(A)
98
98
K (uncertainty for the given sound level)
dB(A)
3
3
Drilling into metal
Vibration emission value a
h,D
=
m/s
2
4.2
4.2
Uncertainty K =
m/s
2
1.5
1.5
Impact drilling into concrete
Vibration emission value a
h,ID
=
m/s
2
–
15.4
Uncertainty K =
m/s
2
–
1.5
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
CORDLESS COMPACT 13 mm DRILL/DRIVER
DCD780
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD785
Содержание DCD780
